A while back, while riding in Pennypack park, the gears on my Superlight were acting up. I wound up having to stay in one gear, and did the rest of the ride as a singlespeed. Despite having tried -- and intensely disliked -- singlespeeding in the past, I found myself enjoying it and for the first time, starting to "get" the appeal. I decided to ressurect my Karate Monkey as a singlespeed.A little while later, I had it back together, and took it out for its inaugural ride, again in Pennypack. (it's one of the best parks in the area for singlespeeding) On that first ride, the bike worked well, but I lost my front brake -- apparently the Marta needed bleeding -- bad. Initially I had some front brake if I pumped the lever, but that went away and I was left with nothing. Managed to finish the ride with only the rear.
So, I pulled off the Martas, and set up my Avid mechanical brakes. No bleeding to be done there, plus they're good brakes. Set them up, and while I was at it, converted the Panaracer Rampages to tubeless using some spare Stan's strips I had on hand. On the next ride, the brakes were great, but I burped the rear tire and lost all the pressure. (turns out the 26er Stan's strips are just a little too narrow for the Salsa Delgado Cross rims) Thankfully Amy had some CO2 so I was able to re-seat the bead and finish the ride.
Bought some proper Stan's 29er strips, which are just that little bit wider, and fixed my rear wheel. Yesterday, I got out to try that, and had no problems with the brakes or tires. But, it was cold - wicked cold - in the single digits. A little ways into the ride, the freehub started to slip, eventually giving out altogether. The grease in the freehub had frozen up, keeping the pawls from moving freely, and they were either damaged, or just plain froze in place. Thankfully there was a paved path so I could head straight back to the car, but without the ability to pedal on my own, I had to rely on getting a tow from Lance and Aaron.
I've been enjoying singlespeeding, and been having good rides, but yeesh! I thought singlespeeds were supposed to be simple, and maintenance free! :D
