Cheap bike parts and more MTBing

Saturday morning, Dmitri, Lance, and I went up to the bike swap meet at the Lehigh Valley velodrome. (now called the "Valley Preferred Cycling Center") I brought a bunch of cash, not looking for anything particular past a set of cranks for the road bike. The Dura Ace cranks on the Giant are starting to look pretty rough, with the clear coat starting to crack, and the aluminum oxidizing. They're good cranks, but need to be refinished, and I know a guy who restores bikes who is interested in seeing what he can do with them. (or, I might try my hand at it)

So, early on, I found a pair of Ultegra external bearing cranks for only $75. Was pretty happy with that and bought them, but later realized I didn't bother to consider they didn't have a bottom bracket, and I also discovered they were missing the plastic tensioning cap as well as one of the clamping bolts. So, the price wasn't quite as good as I thought. Oh well, my bad.

Just two booths later, I found a pair of FSA SL-K carbon fiber road cranks which looked to be take-offs - they showed some scratches but no wear on the rings, and no evidence of pedals ever having been installed - for $90! Right now those same cranks are $450 - on sale - at Colorado Cyclist! That lessened the pain of my hasty purchase on the Ultegras!

After the swap meet, the three of us rode in Ralph Stover/High Rocks park. It's a small park, but very technical, so it's a challenging ride. I didn't ride nearly as well as Friday night's ride, but did decently. Both Lance and Dmitri rode strong, and Dmitri rode some really tough sections -- including one section that Lance tried multiple times without success! (I walked the whole thing)

We then went home, picked up four cases of beer, threw a couple beers in the freezer and worked on Lance's bike.

All in all, I'd call that a Very Good Day. :)

Beaten with my own stick...

I got out for a ride yesterday with Dmitri, a buddy of mine who is a dedicated singlespeeding mountain biker. He's decided to ride the MS-150 with us at the end of the month, but he doesn't have a road bike, so I put my old Airborne Zeppelin together for him to use. Yesterday was his first ride on the bike in several years. Back in 2004 or 2005, both of us entered a local time trial, and he rode the Zep back then... but hasn't touched a road bike since.

Well, I have to say, it's pretty interesting to see my old bike fading away on up the road. Apparently the preparation for a 100 mile MTB endurance race translates well to the road, even if he wasn't familiar with this whole concept of shifting, and having to pedal all the time. On one stretch of road, I was holding about 20mph, and he comes around and starts pulling at a steady 24mph. Yikes! Thankfully I kept the climbing to a minimum, as otherwise the ass-whuppin' would have probably been worse.

The good part was that since we're about the same size, we were able to swap bikes so I could ride the old Zeppelin. Still a nice bike, but definitely different ride. Softer, yet more chattery than my carbon fiber Giant TCR. One thing I really liked, though, was the 46cm c-to-c bars. I've had the bars for a while, but hadn't gotten around to testing them. They're only 2cm wider than the Eastons on the Giant, but that little bit wider is noticable, especially when cranking out of the saddle. The extra leverage is really nice, and the flat tops of the bar is even wider. Of course, having the 31.8mm stem clamp area and being made of aluminum, they are also far stiffer than the carbon Eastons with the smaller 26.0mm clamp. Most bars only come to 44cm c-to-c, but if you're a big person, you might seriously consider looking for the wider 46cm bars. I'm considering getting rid of the two pairs of 44cm bars I have now and finding a carbon 46cm for the Giant.

My comedy of errors...

This year hasn't been much of a mountain biking year for me, what with it causing me back pain and such. On the flipside, it's been a great year for Grace on the MTB, since she's found some new friends to ride with and she's been getting stronger and stronger. I've been riding the road bike and doing pretty well with it, but we both miss riding together, and since she doesn't really road ride anymore, it would have to be on the mountain.

I finally finished rebuilding her rear wheel (she broke a spoke which was previously damaged from an overshift) so she wasn't using my wheel anymore, and since I was working from home, we could get an early start and get a ride in together. So, we pack up everything, along with some bike parts I've been hanging on to for BVL, and head out. It even looks like we're running ahead of schedule, until we realize that with all the stuff we brought, we forgot both of our helmets. So, we turn around and head back home, adding 25 or so minutes to our trip. Thankfully, Brian got stuck in traffic and we wound up at the parking lot at about the same time.

We get our stuff together, and get ready to ride, and as we go to pull away, I realize the bike sagged WAY too much in the back when I sat on it. I look down, and realize that the rear shock had blown through more than half of its travel when I sat on the bike. Well, okay, it had sat unused for a while, and although I've left it for longer and didn't lose any pressure, whatever, I'd just air it up and we'd be on our way.

So, I pumped it up to 175psi, and we were off. Not even 1/8 mile on the trail, I realize that the bike is feeling soft in the rear again, and look down to see that the shock is sagging way too much again. I hop off, and pop on the pump, and the guage reads only 50psi... a minute or two after I inflated it to 175psi. Not a good sign! So I inflate it back up, and as I'm nearing pressure, I can hear the shock leaking. At this point, I tell Grace and Brian to go on without me, and I'll just head back to the car and wait.

So, I head back to the car, and grab my phone. Dmitri's aware of my MTB issues, and being a rider of a bike with no rear suspension, I thought he'd get a laugh out of the problems I had. But... my phone's battery had died! Well, I was on call, so I had my pager, so I started sending him an email... and the pager reset on me for no apparent reason. At this point, it's starting to seem that everything I touch breaks... and I'm a little worried because I sent Grace out on the trails with a new set of tires that were insanely light. Thankfully, BVL was with her, but I expected to hear stories of woe (and anger) when she got back.

Anyhow, while Grace and BVL rode, I hiked in the Andorra Natural Area -- bikes aren't allowed, and I had always wanted to check it out, so that much was good. It's a beautiful area, and I only saw one other person, which was nice as the shared main trails can be pretty busy.

When I finally got home, I took the shock off the bike, inflated it yet again, and put it in the sink, filled with water. Sure enough, it's leaking at the rebound adjuster dial, which is exactly where it was leaking before I sent it back to Push this last time. I specifically asked them to pay attention to that! Wound up sending them an email, we'll see what happens with that.

Oh, and Grace got back from the ride and LOVED the tires. *phew*... if there was one thing to touch that didn't break, her tires would definitely be it!

Progress at the Rally!

The PMBA Rally in the Valley was yesterday, and goes down as the best ride I've had on the mountain bike in probably a year, year and a half.

Grace and I rode the full "advanced" loop, which starts with the ballbuster climb just after Bell's Mill Road, and I actually felt pretty good. Mind you, I took it slowly, used every last tooth of that granny gear, and didn't push too hard, but I got up in a respectable time, and didn't have to walk it. In fact, I cleared all the climbs without walking except a handful on the Indian trail at the end.

My back was NO problem for the first 15 minutes at least, and when it started to hurt it was just a little fatigue, nothing debilitating. A little fatigue is understandable, considering this was my third ride in three days -- road Thursday, Wiss with Grace on Friday, and then the Rally.

This also marks the first time I started feeling some of the power that I have no problem finding when I'm riding on the road. Not much of it, not enough to do anything useful with, but it was there... and this is very good news for me, since it means I'm improving on the mountain bike.

Now, lest you think this was some sort of record-breaking ride, it wasn't -- I was really getting fatigued by the end, and that's when we wound up on the Indian trail, which is probably the hardest in the park! I wound up walking a couple of climbs, and without the usual return on Forbidden Drive, my average speed was a abysmal 7.4mph. Still, I felt far better than I had on any previous ride, so I'm not upset about that average at all. We'll see what happens next time we do a standard loop, bailing out at Valley Green Inn.

Let me just wrap up by saying DZ and the gang of PMBA volunteers did an awesome job organizing and running the Rally. If you ride in the Philly area, definitely consider joining PMBA so your money can help them keep up the good work.

Check out Dmitri's Blog

If you want to check out a good bike blog, check out Dmitri's "The road to SS hundies". He's gotten into riding in a big way and is chronicling his efforts to step it up and ride several hundred-mile mountain bike races (hundies) on his singlespeed. (SS) He's also very active with the Philadelphia Mountain Bike club, organizing and working on trail maintenance days, which is something all mountain bikers should strive to get involved with.